Published on Wed Apr 09 2025 01:05:35 GMT+0000 (Coordinated Universal Time) by Alex

ERYONE Matte PLA: A Deep Dive into This Popular Filament Choice

ERYONE Matte PLA has become a popular choice for 3D printing enthusiasts seeking a smooth, non-reflective finish. Its ease of use and attractive aesthetic make it a compelling option for a wide range of projects. This article provides a comprehensive look at ERYONE Matte PLA, covering its specifications, best practices for printing, and a detailed performance evaluation.

What is ERYONE Matte PLA?

PLA, or Polylactic Acid, is a biodegradable thermoplastic derived from renewable resources like corn starch or sugarcane. ERYONE Matte PLA takes this already popular material and adds a special additive during the manufacturing process. This additive scatters light, resulting in a distinctive matte surface that reduces glare and hides layer lines.

Detailed Specifications

• Material: PLA (Polylactic Acid) with Matte Additive
• Diameter: Typically available in 1.75mm (check product listing for specific tolerances)
• Spool Weight: Usually 1kg (2.2 lbs)
• Recommended Printing Temperature: 190-220°C (374-428°F) – Always consult the specific spool’s label as this can vary.
• Bed Temperature: 20-60°C (68-140°F) – Optional, but often helps with adhesion.
• Print Speed: 40-80 mm/s (adjust based on printer capabilities and model complexity)
• Nozzle Material Recommendation: Brass is usually fine, but hardened steel is recommended for abrasive filaments.
• Density: Approximately 1.24 g/cm³

Usage Tips for Optimal Printing Results

Getting the best results with ERYONE Matte PLA requires some attention to detail. Here’s a breakdown of key considerations:

• Temperature Tuning: Start within the recommended temperature range (190-220°C), and adjust in 5°C increments. Too low, and you’ll see poor layer adhesion; too high, and you might experience stringing or bubbling.

• Bed Adhesion: While PLA generally adheres well, ERYONE Matte PLA can sometimes be a bit more finicky. Applying a thin layer of glue stick, hairspray, or using a PEI sheet can significantly improve adhesion, especially for larger prints. A heated bed is often beneficial.

• Cooling: Adequate cooling is crucial for preventing warping and ensuring sharp overhangs. Utilize your printer’s part cooling fan at a moderate to high setting.

• Print Speed: For intricate models, reducing the print speed can improve accuracy and layer adhesion.

• Retraction Settings: Experiment with retraction settings to minimize stringing. Adjust retraction distance and speed until you achieve clean prints.

• Storage: PLA is hygroscopic, meaning it absorbs moisture from the air. This can lead to printing issues like bubbling and stringing. Store your ERYONE Matte PLA in an airtight container with desiccant packets to keep it dry. If you suspect your filament has absorbed moisture, consider drying it in a filament dryer or a low-temperature oven before printing.

• Leveling: Ensure your bed is properly leveled. Consistent first layer adhesion is crucial for successful prints, especially with matte PLA.

Performance Evaluation

Here’s a breakdown of ERYONE Matte PLA’s performance across key metrics, rated out of 10:

• Print Quality: 8/10 - Excellent surface finish with a smooth, matte texture that hides layer lines effectively.
• Toughness: 6/10 - Similar to standard PLA; suitable for decorative items and prototypes, but not for high-stress applications.
• Flexibility: 3/10 - PLA is generally brittle; ERYONE Matte PLA is no exception.
• Warping: 7/10 - Less prone to warping than some other PLA variations, especially with a heated bed and good adhesion.
• Adhesion: 8/10 - Good adhesion, especially with recommended bed adhesion aids (glue stick, hairspray, PEI sheet).
• Moisture Sensitivity: 6/10 - As with all PLA, susceptible to moisture absorption; requires proper storage and drying if needed.
• Color Range: 9/10 - ERYONE offers a wide and vibrant color palette in their Matte PLA line.
• Temperature Range: 7/10 - Offers a decent range for optimal printing.
• Odor & Fumes: 9/10 - PLA generally has a low odor, and ERYONE Matte PLA is similar.
• Spool Winding Quality: 8/10 - Generally well-wound spools, reducing the risk of tangles during printing.

Average Score: 7.1/10

Conclusion

ERYONE Matte PLA is a solid choice for those seeking a PLA filament with a distinctive matte finish. Its ease of use, wide color selection, and ability to hide layer lines make it a great option for a variety of printing projects, particularly those where aesthetics are important. While it shares the limitations of standard PLA in terms of toughness and flexibility, its other strengths make it a valuable addition to any 3D printing toolkit. Proper storage and adherence to recommended printing parameters are crucial for achieving the best possible results.

Written by Alex